PRESONUS AudioBox 44VSL Quick Start Manual page 55

Owner's Manual
Mid EQ Frequency Control
Mid EQ Gain Control
Mid Hi Q Button
High EQ On/Off Button
High EQ Frequency Control
High EQ Gain Control
Software: Virtual StudioLive and Studio One Artist
Sets the Center Frequency of the Mid EQ.
The center frequency is the middle of the passband (the mean) between
the lower and upper cutoff frequencies that define the limits of the band.
You can adjust the center frequency from 380 Hz to 5 kHz.
Sets the Gain Attenuation or Boost of the Center Frequency
of the Mid Band.
This control sets the Gain cut or boost at the center frequency of the
Mid band. The level of the center frequency can be set between
-15 and +15 dB.
Enables a Narrow Bandwidth for the Mid Band EQ on the Selected
Input or Bus.
Q is the ratio of the EQ band's center frequency to its bandwidth.
With a constant center frequency, higher Q values indicate a narrower
bandwidth, so Q is often equated with bandwidth. By default,
the Q is set to a value of 0.55. When the Hi Q button is engaged,
the Q setting will be increased to 2.0, thus narrowing the bandwidth to
provide more precise control.
Activates Control for the High EQ for the Selected Input or Bus.
This button activates control of the High band for the selected channel or
bus. The button will illuminate to indicate control is active.
The High EQ band is available for all input and output buses.
Sets the Center Frequency of the High EQ.
The center frequency is the middle of the passband (the mean) between
the lower and upper cutoff frequencies that define the limits of the band.
You can adjust the center frequency from 1.4 to 18 kHz.
Sets the Gain Attenuation or Boost at the Center Frequency of the High
EQ Band.
This control sets the gain cut or boost at the center frequency of the High
EQ band. The level of the center frequency can be set between -15 and
+15 dB.
4
Virtual Studio Live 4.1
27