AWA MSDV2413-03-D0 Service Manual page 59

MENU OPERATION
Press the SETUP button on the remote control,
the SETUP MENU will be displayed. After
accessing the setup menu, press the direction
buttons for up and down movement to select an
item desired, and press RIGHT direction button
to select the SUBMENU item. Then press the
ENTER/OK button to confirm. Press LEFT
direction button return to the menu of upper
level. To exit the setup, press the SETUP button
again. In the SETUP MENU, you may choose
any of the following options as you like.
LANGUAGE SETUP
Select Language in the setup menu, and display
the Language submenu:
Audio
DVD menu
OSD Language
Use this item to select the language of the setup
menu and screen display.
Subtitle
This option provides the preset subtitle
language.
Audio
Select the built-in disc dubbing language
options.
DVD Menu
This option provides the film's menu language
options.
VIDEO SETUP
Select Video in the setup menu, and display the
Video submenu:
SYSTEM SETUP
Aspect Ratio
Select the aspect ratio.
Notes:
The image display ratio is related to the
recorded disc format. Some disc can not display
images in the aspect ratio you choose. If you
play a disc recorded in 4:3 format on a wide
screen TV, black bars will appear on the left and
right side of the screen. You must adjust the
screen setting depending on the type of the
television you have.
TV System
Select the different TV system.
Note: The DVD player setting should be
matched to your TV set.
output format, refer to the instructions of your
TV set.
RATING SETUP
Select Rating
display the Rating submenu:
Parental Control
Set the parental control feature of the player
Note
: Password is needed before setting
Parental Control.
Set Password
Input four digits (password), then press
/Ok to confirm.
Note:
If you forget your password, please use
the universal password 6666 to unlock.
MISC SETUP
Select MISC in the setup menu, and
display the submenu:
Use Default Settings
Reset setup data to factory default value.
- 58 -
Service Manual
Model No.:
For more information of
in the setup menu, and
ENTER