Remove The Power Module; Remove The Main Board - AWA MSDV2413-03-D0 Service Manual

4-4 Remove the main board

Remove the two screw indicated on
the figure above by ○
Then put the terminal bracket to the side

4-5 Remove the power module

Disconnected the coupler
J21 J22 J20 J2 J25 J21 J22 J20 J2 J25
J10 J11 J26 J17 J10 J11 J26 J17
Remove the Main board
Remove the four screw indicated on the
figure above by ○
Then remove the power module
- 16 -
Service Manual
Model No.: