Disassemble And Assemble; Remove The Pedestal; Remove The; Remove The Adhesive Tape - AWA MSDV2413-03-D0 Service Manual

Service Manual
Model No.:

4. Disassemble and assemble

4-1 Remove the Pedestal

4-2Remove the Back Cover

4-3. Remove the adhesive tape

Lay down the unit so that rear cover
faces upward
Remove the three screw from the
rear cover indicated with ○
Then remove the pedestal
Remove the these screw indicated on
figure above by ○
Then remove the back cover from the
unit.
Remove the front frame on the
figure above
- 15 -