Operation Instructions; Back Panel Controls - AWA MSDV2413-03-D0 Service Manual

6. Operation Instructions

KEY BOARD

6.2 Back panel controls

All the terminals are (from left to right):
AC Power input, HDMI input, YPbPr
Audio input, PC Audio input, AV output
Antenna socket.
.
Note: 1. AV and YPbPr inputs share the Rear Audio input channel.
2. When the HDMI port receives a DVI signal, the matching audio signal is received
by the PC Audio input.
SOURCE
MENU
CH+
CH-
VOL+
VOL-
STANDBY
USB
HDMI INPUT PC
AUDIO INPUT
Pr Pb L
AV Y R
(component video) input
(composite video and audio)
- 24 -
1. SOURCE:
Displays the input source Menu.
2. MENU:
Displays the main MENU.
3. CH+/CH-
In TV mode, press "CH+" or "CH-" to change the
channel up and down.
In MENU mode, press "CH+" or "CH-" to select items.
4. VOL+/VOL-
Adjusts the sound level.
In MENU mode, press "VOL+" or "VOL-" to adjust the
item that you have selected.
5. STANDBY
Once the TV's main power switch has been activated,
press this button to turn the unit ON from STANDBY
mode.
Press it again to turn the set back to STANDBY.
6. USB
The USB memory stick should be plugged into the
unit directly. USB extension cables should not
be used to avoid failing of data transferring
and interference caused.
To access or play the files on your USB memory
stick using this USB socket on your TV, please
refer to use of the Applications Menu on page 17
of this manual.
AV OUTPUT
RF INPUT
AV L R
, AV composite video input,
Service Manual
Model No.:
, VGA input,