Inserting Pages Between Copies Of Transparencies ("Ohp Interleaving" Function); To Make Settings For The "Ohp Interleaving" Function - Kyocera KM-C2030 Operation Manual

1.7 Inserting Pages Between Copies of Transparencies ("OHP Interleaving" Function)

1
1.7 Inserting Pages Between Copies of Transparencies
("OHP Interleaving" Function)
After each overhead transparency is copied, a page from a different paper source
can be added to the stack of transparencies as an overleaf. In order to use this func-
tion, the overhead transparencies should be loaded into the multipurpose paper
drawer (1st drawer).
Tip
We recommend that interleaf paper (inserted paper) with the same size as the
overhead transparencies first be loaded into any drawer other than the multipur-
pose paper drawer (1st drawer) with the same orientation as the overhead
transparencies.

To make settings for the "OHP Interleaving" function

1
Position the document(s) to be copied.
❍ For more details, refer to "Feeding the Document" of chapter 4 "Original
Documents" in the Basic Operations volume.
2
Select the desired Color setting.
❍ For more details, refer to "Selecting the Color Setting" of chapter 5
"Specifying Copy Settings" in the Basic Operations volume.
3
Touch [Auxiliary].
The Auxiliary screen appears.
4
Touch [OHP Interleaving].
5
Select the drawer loaded with the
interleaves, and then touch
[Enter].
1-34