Operating Instructions - Samsung SyncMaster 1000s Service Manual

4 Operating Instructions

4-2 Power Management System
This monitor has a built-in power management
system called PowerSaver. This system saves
energy by switching your monitor into a low-
power mode when it has not been used for a
certain amount of time. The available modes are
"On," "Standby," "Suspend," and "Off."
This system operates with a VESA DPMS
compliant video card installed in your computer.
You use a software utility installed on your
computer to set up this feature. See the table
below for details.
Note 1: This monitor automatically returns to
normal operation when horizontal and
vertical sync return. This occurs when you
move the computer's mouse or press a key
on the keyboard.
Table 4-2. Display Power Management Signaling (DPMS)
State
Normal
Operation
Items
Horizontal Sync Active
Vertical Sync Active
Video Active
Power
Green
Indicator
Power 150 W (max.)
Consumption 130 W (nominal)
4-2
Power Saving Function EPA/NUTEK
Suspend Mode/
Standby Mode
Position A1
Inactive Active
Active Inactive
Blanked Blanked
Orange/Green
Orange
Blinking
130 W (max)
Less than
110 W
15 W
(nominal)
Note 2: This monitor is EPA Energy Star
compliant and NUTEK compliant when
used with a computer equipped with
VESA DPMS functionality. If your
computer system cannot support a display
power management function, you can
purchase an optional DPMS software
program to enable the power saving
function. Please contact Samsung or your
dealer for more information.
Note 3: For energy conservation, turn your
monitor OFF when it is not needed, or
when leaving it unattended for long
periods.
Power-off Mode/
Position A2
Inactive
Inactive
Blanked
Orange
Blinking
Less than
5 W
SyncMaster 1000s (CGP1607L)