Unpacking; Placement & Ventilation - Plinius 9200 Instruction Manual

Unpacking

Open the box from the top and remove the accessories from the foam end caps.
You may now proceed to lift the unit from the box, Once the unit is removed you can
proceed with the removal of the foam end caps. These caps are designed to fit on
the front and back of the unit for maximum protection. Retain the packaging for future
transportation of this unit.
Placement & Ventilation
Your Plinius 9200 may operate at a moderately high temperature, especially
during extended listening sessions. The ideal location is upon a rigid stand, away
from direct contact with any temperature sensitive materials, furniture or deep
pile carpets. Ventilation through and around the amplifier should also be kept
unimpeded. Please ensure that the heat vents (slots in the base and lid) are not
covered or restricted in any way.
The Plinius 9200 design incorporates a very high level of mechanical decoupling of
the input and output. It can however still be influenced by acoustical feedback in
the operating environment. The use of acoustic cones or a suitably spiked amplifier
stand or table may further enhance the performance of this preamplifier. Consult
your Plinius dealer for further advice if required.
4