Table of Contents
Advertisement
Unpacking
Open the box from the top and remove the accessories from
the top foam cap. You may now proceed with the removal of
the top foam cap. Once you have removed the top foam cap
you may now proceed to lift the unit from the box.
Retain the packaging for future transportation of this unit.
Placement & Ventilation
This product may operate at a moderately high temperature, especially during extended
listening sessions. With this in mind, we recommend the following guidelines for
placement and ventilation.
Ǟ
The ideal location is upon a rigid stand, away from direct contact with any
temperature sensitive materials, furniture or deep pile carpets.
Ǟ
Ventilation through and around the preamplifier should be kept unimpeded.
Ǟ
Ensure heat vents (slots in the base and lid) are not covered or restricted in any way.
Ǟ
Equipment racks should be of an open type with no closed side panels and no closed
front or rear panels. Ensure a minimum of 100mm clearance on all sides of your
Plinius unit to other equipment and the shelf above.
Ǟ
If the unit is in an enclosed cabinet, the clearance should be greater than 400mm
on all sides. Ensure the space between the chassis and shelf below the unit is
unobstructed at all times.
Ǟ
When stacking separate audio components, ensure a minimum of 400mm clearance
above the top unit is maintained for suitable airflow.
Ǟ
NOTE: This unit has been designed for use in moderate climates only, not for tropical
conditions.
The design of this product incorporates a very high level of mechanical decoupling of
the input and output. It can however still be influenced by acoustical feedback in the
operating environment. The use of acoustic cones or a suitably spiked preamplifier stand
or table may further enhance the performance of this preamplifier. Consult your Plinius
dealer for further advice if required.
PLINIUS REFERENCE M-10
3
Advertisement
Table of Contents
