Table of Contents
Advertisement
Unpacking
Open the box from the top and remove the accessories from the
top foam cap. You may now proceed with the removal of the top
foam cap. Once you have removed the top foam cap you may
now proceed to lift the unit from the box, You will require help
with this, as this unit is very heavy.
Retain the packaging for future transportation of this unit.
Placement & Ventilation
This Plinius product may operate at a moderately high temperature, especially during
extended listening sessions. With this in mind, we recommend the following guidelines
for placement and ventilation.
•
The ideal location is upon a rigid stand, away from direct contact with any
temperature sensitive materials, furniture or deep pile carpets.
•
Ventilation through and around the amplifier should be kept unimpeded.
•
Ensure heat vents (slots in the base and lid) are not covered or restricted in any way.
•
Equipment racks should be of an open type with no closed side panels and no closed
front or rear panels.
•
Ensure a minimum of 400mm clearance on all sides of your Plinius unit to other
equipment and the shelf above. Ensure the space between the chassis and shelf
below the unit is unobstructed at all times.
•
DO NOT place this unit in an enclosed cabinet.
•
DO NOT stack other audio components on top of this unit.
•
NOTE: This unit has been designed for use in moderate climates only, not for tropical
conditions.
The design of this Plinius product incorporates a very high level of mechanical decoupling
of the input and output. It can however still be influenced by acoustical feedback in the
operating environment. The use of acoustic cones or a suitably spiked amplifier stand or
table may further enhance the performance of this amplifier. Consult your Plinius dealer for
further advice if required.
PLINIUS REFERENCE A-150
3
Advertisement
Table of Contents
