Parmeter Base Address; Midi Parameter Change Table - Yamaha RM1x Service Manual

RM1x
(3-4) SYSTEM REAL TIME MESSAGE
Not recorded as Sequence Data.
(3-4-1) TIMING CLOCK
STATUS 11111000(F8H)
You can select whether the internal clock will be used as the Timing Clock, or whether Timing Clock
messages from the MIDI IN will be used.
Transmission/reception can be turned On/Off.
(3-4-2) START
STATUS 11111010(FAH)
Transmission/Reception can be turned On/Off.
(3-4-3) CONTINUE
STATUS 11111011(FBH)
Transmission/Reception can be turned On/Off.
(3-4-4) STOP
STATUS 11111100(FCH)
Transmission/Reception can be turned On/Off.
(3-5) SYSTEM EXCLUSIVE MESSAGE
All System Exclusive Messages are recorded and played back.
Even if time intervals existed within the actual data that was received, the entire message between F0
and F7 will be recorded into one timing location.
For playback, an interval time can be specified for each 1K bytes.
(3-6) SECTION CONTROL
11110000 F0
01000011 43
01111110 7E
00000000 00
0sssssss ss
0ddddddd dd
11110111 F7
ss=08H-0FH, dd=on is received, and the PATTERN will be changed to the RM1x's sections A - P
respectively.
<Table 1-1> Parmeter Base Address
Parameter Change
Address
(H) (M)
SYSTEM 00 00
00 00
00 00
INFORMATION 01 00
EFFECT 1 02 01
02 40
: :
MULTI PART 08 00
08 0F
08 10
: :
<Table 1-2> MIDI Parameter Change table ( SYSTEM )
Address Size Data
(H) (H) (H)
00 00 00 4 0000
01 ..07FF
02
03
04 1 00..7F
05 1 Not Used
06 1 28..58
7D Not Used
7E 00 XG System On
7F 00 All Parameter Reset
TOTAL SIZE 06
<Table 1-3> MIDI Parameter Change table ( EFFECT 1)
Address Size Data
(H) (H) (H)
02 01 00 2 00..7F
00..7F
02 1 00..7F
03 1 00..7F
04 1 00..7F
05 1 00..7F
06 1 00..7F
07 1 00..7F
08 1 00..7F
09 1 00..7F
0A 1 00..7F
0B 1 00..7F
0C 1 00..7F
0D 1 01..7F
TOTAL SIZE 0E
52
Exclusive status
YAMAHA ID
Style
Section Control
Section
On/Off
End of Exclusive
(L) Description
00 System
7E XG System On
7F All Parameter Reset
00 System Information
00 Effect1(Reverb,Chorus,Variation )
00 Reserved
: :
00 Multi Part 1
:
00 Multi Part 16
00 Reserved
: :
Parameter Name Description
Master Tune -102.4..+102.3[cent]
1st bit3-0→bit15-12
2nd bit3-0→bit11-8
3rd bit3-0→bit7-4
4th bit3-0→bit3-0
Master Volume 0..127
Transpose -24..+24[semitones]
00=XG Sytem on (receive only)
00=on (receive only)
Parameter Name Description
Reverb Type MSB Refer to Ef. Parameter List
Reverb Type LSB 00 : basic type
Reverb Parameter 1 Refer to Ef. Parameter List
Reverb Parameter 2 Refer to Ef. Parameter List
Reverb Parameter 3 Refer to Ef. Parameter List
Reverb Parameter 4 Refer to Ef. Parameter List
Reverb Parameter 5 Refer to Ef. Parameter List
Reverb Parameter 6 Refer to Ef. Parameter List
Reverb Parameter 7 Refer to Ef. Parameter List
Reverb Parameter 8 Refer to Ef. Parameter List
Reverb Parameter 9 Refer to Ef. Parameter List
Reverb Parameter 10 Refer to Ef. Parameter List
Reverb Return -°..0..+6dB(0..96..127)
Reverb Pan L63..C..R63(1..64..127)
(3-7) MIDI TIME CODE(QUARTER FRAME MESSAGE)
STATUS 11110001(F1H)
0nnnxxxx
If MTC is selected as the Timing Clock, MTC Quarter Frame messages will be received.
(3-8) MIDI MACHINE CONTROL
These will be transmitted if MTC is selected as the Timing Clock.
(3-8-1) STOP(MCS)
11110000 F0
01111111 7F
01111111 7F
00000110 06
00000001 01
11110111 F7
Transmitted when the STOP button is pressed.
(3-8-2) DEFERRED PLAY(MCS)
11110000 F0
01111111 7F
01111111 7F
00000110 06
00000011 03
11110111 F7
Transmitted when the PLAY button is pressed.
(3-8-3) LOCATE(MCP)
11110000 F0
01111111 7F
01111111 7F
00000110 06
01000100 44
00000110 06
00000001 01
0tthhhhh hr
0cmmmmmm mn
0kssssss sc
0gifffff fr
0bbbbbbb ff
11110111 F7
Transmitted when you move between measures in the SONG mode.
Default
value(H)
00 04 00 00
(0400)
(not reset by XG or GM on)
(not reset by XG or GM on)
7F
40
Default
value(H)
01(=HALL1)
00
depends on Reverb type
depends on Reverb type
depends on Reverb type
depends on Reverb type
depends on Reverb type
depends on Reverb type
depends on Reverb type
depends on Reverb type
depends on Reverb type
depends on Reverb type
40
40
Exclusive status
RealTime Header
device ID
MMC Command Message
STOP(MCS)
End of Exclusive
Exclusive status
RealTime Header
device ID
MMC Command Message
DEFERRED PLAY(MCS)
End of Exclusive
Exclusive status
RealTime Header
device ID
MMC Command Message
LOCATE(MCP)
Byte Count
"TERGET" Sub Command
standard time specification with sub-frames
End of Exclusive