Confirmation Of Midi Data - Yamaha RM1x Service Manual

RM1x
Disk
Disk Full
File Not Found
Bad Disk Format Now?
(Y/N)
No Disk
Unformat Format Now?
(Y/N)
Write Protected
Bad File
Illegal Format
Disk Changed
Can't Change File Name
Illegal File
No Data
Messages other than error messages
Can't Undo. Ok? (Y/N)
Are you sure? (Y/N)
Completed
Executing...

CONFIRMATION OF MIDI DATA

If you want to confirm the MIDI data, you can see them on the owner's manual or PDF service manual.
42
This will appear if the floppy disk is full and has no room to save the file. Either use a
new floppy disk, or delete unneeded files before trying the operation once again.
When loading, this will appear if the specified file does not exist in the floppy disk.
Insert the disk once again, and try the operation again.
The floppy disk is faulty. Press the [Yes +1] button to format the disk.
This indicates that the floppy disk is not correctly inserted into the RM1x. Insert the
floppy disk correctly.
This will appear if the floppy disk is not formatted. Press the [Yes +1] button to format
the disk.
This will appear if the write-protect slider of the floppy disk is in the write prohibit
position. Remove the floppy disk, close the write-protect slider, and try the operation
once again.
This will appear when you attempt to load a defective file.
This will appear if the floppy disk is of a format which the RM1x is not able to handle.
Check the contents of the disk.
This will appear if you have exchanged disks when you should not have. Try the
operation once again from the beginning.
When renaming, this will appear if the floppy disk already contains a file with a name
identical to the specified filename. Specify a different filename.
When loading, this will appear if the specified file cannot be handled by the RM1x.
Check the contents of the file.
When saving data to floppy disk, this will appear if the selected song or style contains
no data, and the save operation is invalid. Select a different song or style.
If executing a job would fill up the internal memory so that Undo will not be available,
this message will appear. If you are sure that you will not need to Undo this job,
press the [YES +1] button. To cancel without executing the job, press the [NO -1]
button, and delete unneeded songs, patterns, or user phrases before trying the
operation once again.
Before an operation is executed, this message will ask you for confirmation. Use the
[YES +1]/[NO -1] button to either cancel or execute.
This will appear when the current process has been completed. Press any button
and the message will disappear.
When loading, saving, or formatting, this message will appear while the job is being
executed. Please wait.