At The End Of A Program; Interrupting A Program - Miele G 2872 Operating Instructions Manual

Use

At the end of a program

At the end of a program the optical
control light flashes slowly with the door
closed.
The optical function light goes out one
hour after the end of a program.
If the program is finished the message
Program finished
appears in the display, and the door is
opened slightly.
^ Unload the dishwasher.
Unloading the lower basket first will
prevent water drops from the upper
basket and cutlery tray (depending on
model) from dropping onto dishes in
the lower basket.
^ Turn the dishwasher off o.
The dishwasher continues to use
electricity until turned off with the o
button.
If the dishwasher is not used for a
longer period of time, e.g. vacationing,
turn off the water supply.
36
Drying plus
or

Interrupting a program

A program is interrupted as soon as the
door is opened. If the door is closed,
the program will continue from where it
was interrupted.
,
Open the door with care. The
water in the dishwasher is hot.
Danger of scalding. Before closing
the door again, leave it ajar for
approx. 20 secs. This will enable the
temperature in the wash cabinet to
settle. Close the door firmly until it
clicks into place.