Miele G 2832 Operating Instructions Manual
Hide thumbs
Also See for G 2832:
- Operating instructions manual (80 pages) ,
- Technical information (240 pages) ,
- Operating instructions manual (80 pages)
Related Manuals for Miele G 2832
Summary of Contents for Miele G 2832
-
Page 1: Operating Instructions
Operating Instructions Dishwasher G 2832 en - US, CA To prevent accidents and machine damage read these instructions before installation or use. M.-Nr. 07 329 110... -
Page 2: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS....... . . 4 Guide to the dishwasher ..........7 Control panel . - Page 3 Contents Settings ............40 Drying Plus.
-
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING – Electrical Safety Before installation, make sure that When using your dishwasher, follow the voltage and frequency listed on the basic precautions, including the data plate correspond with the following: household electrical supply. This data must correspond to prevent injury and Read all instructions before machine damage. - Page 5 A damaged appliance is Do not install this dishwasher dangerous. Unplug the machine and beneath a cooking surface, oven or any call your Miele dealer or the Miele appliance that radiates heat. Technical Service Department. High temperatures from these units Ensure that any plastic wrappings, may damage the dishwasher.
- Page 6 If the power cord is damaged it before using the dishwasher. This will must only be replaced by a Miele release any accumulated hydrogen Service technician with a genuine Miele gas. Do not smoke or use an open power cord.
-
Page 7: Guide To The Dishwasher
Guide to the dishwasher a Upper spray arm (not visible) g Triple filter system b Cutlery tray h Data plate c Upper basket i Child Safety Lock in the door handle (not visible) d Middle spray arm j Rinse aid reservoir e Air inlet for drying k Dual compartment detergent (depending on model) -
Page 8: Control Panel
Guide to the dishwasher Control panel a K (Information) touch control e Standby indicator To display more info about the The indicator flashes when the displayed menu dishwasher is turned on but the display is turned off. b s (On/Off) touch control f Clear touch control To turn the dishwasher on and off To switch back to the previous menu... -
Page 9: Display
Guide to the dishwasher Display The following can be selected in the display : A bullet in the display next to the touch control shows that a function can be – the wash program selected with this control. – the options –... -
Page 10: Caring For The Environment
Caring for the environment Energy saving washing This dishwasher is exceptionally economical in the use of water and electricity. For best results follow these tips: ^ For lowest energy consumption and the gentlest washing of china and crystal, connect the dishwasher to a cold water source. -
Page 11: Before Using For The First Time
Before using for the first time To open the door To close the door ^ Push the baskets in. ^ Lift the door and push until the catch engages. The door will then close automatically. Do not put your hand inside of the door as it is closing. - Page 12 Before using for the first time Welcome screen ^ Turn the dishwasher on s. The Welcome screen shows when the washer is turned on for the first time. Language setting The display changes automatically to the language setting. Sprache F °...
- Page 13 Before using for the first time Time of day setting The display changes automatically to the time of day setting. Time of day + ° 12:00 - ° OK ° ^ Set the hours using the controls and confirm with Set the minutes and confirm.
-
Page 14: Water Softener
Before using for the first time Water softener Checking the water hardness The water hardness measured by the Every dishwasher is tested before sensor can be displayed. leaving the factory. Any water See "Settings J - Water hardness". remaining in the machine is from the final factory test and does not indicate that the machine has been used. -
Page 15: Filling The Salt Container
Before using for the first time Filling the salt container Inadvertently filling the salt container with dishwashing detergent will damage the water softener. Only use water softener salt specially formulated for dishwashers. Other salts may contain insoluble additives which can impair the water softener. ^ Place the provided funnel over the ^ Remove the lower basket and salt container. -
Page 16: Rinse Aid
Before using for the first time Rinse aid Rinse aid helps to prevent spotting on dishes and glassware. The rinse aid is filled in the reservoir and the set amount will be automatically dosed. Filling the rinse aid reservoir with detergent will damage the reservoir. -
Page 17: Rinse Aid Refill Message
Before using for the first time Rinse aid refill message Insufficient rinse aid When the message first comes on, there will be enough rinse aid left for 2 - 3 washes. ^ Refill rinse aid after the program has finished. If the "Tab"... -
Page 18: Loading The Dishwasher
Loading the dishwasher ^ The spray arms must not be blocked Do not wash items soiled with by items that are too tall or hang ash, sand, wax, grease or paint in through the baskets. Check the dishwasher. clearance by manually rotating the Ash and sand do not dissolve and spray arms. -
Page 19: Items Not Recommended For Dishwashing
Loading the dishwasher Items not recommended for Glassware: dishwashing – There are no standard guidelines for washing glassware, when in doubt – Cutlery with wooden handles wash by hand. – Wooden cutting boards – When purchasing new dishes, – Glued items such as old knives with glasses and cutlery, make sure they handles glued together around the are dishwasher safe. -
Page 20: Split Cutlery Tray
Loading the dishwasher Split cutlery tray Spoons with thick handles may have to ^ Arrange the cutlery as shown in the be placed as knives and forks with their heads in the holders. cutlery tray. For easier unloading cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc. -
Page 21: Upper Basket
Loading the dishwasher Upper basket Removable spike insert The spike insert can be removed to Always use the dishwasher with create more space for larger items, the upper and lower basket inserted. e.g. a saucepan. Tall items (except during the program). - Page 22 Loading the dishwasher Adjustable cup racks Coffee bar ^ Raise the rack to make room for tall (depending on model) glasses. Lower it to double stack Glasses can be leaned against the smaller pieces. coffee bar to allow a firm stand. The height of the cup rack can be adjusted in two levels.
- Page 23 Loading the dishwasher Universal support bar The support bar will hold tall glasses and stemware securely. ^ Fold the bar down and lean the desired glasses against it. ^ If desired, a section of the cutlery tray can be removed to allow for even taller glasses.
-
Page 24: Adjusting The Upper Basket
Loading the dishwasher Adjusting the upper basket Depending on the setting of the upper basket, a variety of plate dimensions The upper basket can be raised or can be accommodated. lowered to accommodate tall items. For example: If the upper basket is in The basket can also be angled to fit tall its highest position a plate with a items in both, the upper and lower... -
Page 25: Lower Basket
Loading the dishwasher Lower basket Foldable spikes ^ For larger and heavier items such as The foldable spikes can be used for plates, serving platters, saucepans, small plates and saucers. bowls, etc. Small plates and saucers can also be arranged in the lower basket. Two rows of spikes can be folded down, to create more room for larger dishware, e.g. - Page 26 Loading the dishwasher Removable spike insert Removeable PlateGuard Plus with StemGuard The spike insert can be removed in order to make room for larger tableware (depending on model) or to use a different insert. This insert is ideal for cups, glasses, plates, bowls, pots and pans.
- Page 27 Loading the dishwasher Vase / Bottle insert (depending on model) The vase / bottle insert can be used to rinse narrow items, e.g. vases, baby bottles, etc. Removing the insert a: ^ To remove the insert, gently pull the handle upwards. Inserting the insert b: ^ Place the insert into the lower basket.
-
Page 28: Basket Accessories
Basket accessories Additional inserts for the upper and lower baskets may be purchased from your Miele dealer or Miele. Depending on the model some accessories come standard with the machine. Glassware insert GGO To wash long stemmed glassware, attaches to the upper basket... -
Page 29: Use
Fill the detergent dispenser only tabs may not dissolve completely. when you are ready to start the dishwasher. Dishwasher cleaning products are available from MIele. Only use detergents formulated for domestic dishwashers. Use only the recommended amount of detergent. Continued use of too much detergent may cause machine damage. -
Page 30: Adding Detergent
^ Add detergent to compartment II and Adding detergent close the flap. ^ If a Pre-rinse is desired, and available for your chosen program, add 1 teaspoon (5 ml) of detergent to compartment I. ^ To open, press the latch on the detergent dispenser. -
Page 31: Selecting A Program
Turning on ^ Make sure the spray arms can rotate freely. ^ Close the door. ^ Open the water supply, if closed. ^ Turn the dishwasher on by touching the s control. The main menu shows in the display. If the memory function is selected, the last selected program is displayed. -
Page 32: Program Guide
Program guide Program When to use Program sequence Main Interim rinse Final Drying rinse wash rinse Normal For normally soiled dishware with dried on food Pots & Pans For normally soiled pots & pans with dried on food, and heavily soiled dishware, 120% detergent recommended China &... - Page 33 Program guide Program When to use Program sequence Pre-rinse Main Interim rinse Final Drying wash rinse Light Soiling For lightly soiled dishware, e.g. party dishware Energy Saver The water intake temperature must be 115°F (45°C) for light to normally soiled dishware Plastics To gently clean...
-
Page 34: Use
^ Select the desired options. The detergent type can now be set. The selected options are marked with a You can choose between normal L check. powder, gel or Tabs. See "Settings J ^ To de-select an option press the - Detergent". -
Page 35: Starting A Program
Starting a program Time display ^ Select Start Before the program starts, the time display shows the running time of the Dishes can be The program starts and selected program in hours and minutes. added appears in the display. During the running program the As long as this reference is shown, remaining time is shown in the time tableware can be added to the... -
Page 36: At The End Of A Program
At the end of a program Interrupting a program At the end of a program the display A program is interrupted as soon as the Program finished Drying shows door is opened. If the door is closed, plus with the door slightly open (if the program will continue from where it activated). -
Page 37: Changing A Program
Changing a program If the detergent flap is already open, do not change the program. If a program has already started and you wish to change it: Sensor Wash 12:00 Pre-rinse Time left 1:30 h Cancel ° ^ Select Cancel ^ Confirm the message Cancel program? with... -
Page 38: Additional Options
Additional options Delay start The starting time of a program can be delayed between 15 minutes and 24 hours. The start can be delayed in 15-minute-increments. When using the "Delay Start" function make sure that the detergent compartment is dry before adding detergent, use a cloth if necessary. - Page 39 Additional options Sensor Wash 12:00 Start at 12:00 Cancel ° The program name and start time are displayed. The program starts automatically at the selected time. Starting a program before the delay start has elapsed: A program can be started before the delay start time has elapsed.
-
Page 40: Settings
Settings The "Settings J" menu allows you to adjust standard settings Open the Settings J menu ^ Turn the dishwasher on s. The main menu shows in the display. If the memory function is selected, the last selected program is displayed. See "Settings J - Memory". In this case, switch to the main menu by touching "Clear". - Page 41 Settings Language J Time of day The display contents can be shown in This selection allows the clock to be different languages. shown as 24 or 12 hours and to set the clock. The displayed language can be changed by the submenu Indicating the time of day setting "Language J".
- Page 42 Settings Detergent To achieve best results the used If the "Tab" indicator is lit than the detergent can be set on your program sequence is adapted to suit dishwasher. The selections available detergents than contain rinse aid and are "Powder", "Gel" and "Tab". The salt (as well as other components program cycle sequence will be where applicable).
-
Page 43: Drying Plus
Settings Drying Plus °d gr/gal Setting in display The Drying plus function automatically opens the door slightly at the end of a program, in order to improve the drying process. This function can also be deactivated. ^ Select the desired setting and confirm with Water hardness The dishwasher is equipped with a... -
Page 44: External Water Softener
Settings External water softener Filter check If the dishwasher is connected to an This selection allows you to set the external water softener unit which is number of cycles run before the filter regenerated with salt, the water check message shows. hardness must still be set in the You can select between 30 and 60 dishwasher. - Page 45 Settings Reorganize program list The order of the programs in the program list can be reorganized. Frequently used programs can be saved to the first three positions. Select program for position 1 12:00 ° Normal B ° Pots & Pans °...
-
Page 46: Save Options
Settings Save options Additional options can be selected for some programs, e.g. extended drying. See "Use - Selecting options". Save options allows you to save the selected options for future use of the program. This function is turned off by default. ^ Select the desired setting and confirm with... - Page 47 Settings Child Safety Lock The Child Safety Lock protects the dishwasher from misuse. If the dishwasher is turned on while the Child Safety Lock is The appliance is locked activated, the display shows The lock must be deactivated before the dishwasher can be used.
- Page 48 Settings Temperature Buzzer volume The temperature can be displayed in Two buzzer volumes can be selected or "°C/Celsius" or "°F/Fahrenheit". the buzzer can be turned off. The temperatures are shown in °C/Celsius by default. The buzzer tone at the end of a ^ Select the desired temperature unit program is turned off.
-
Page 49: Button Tone
Settings Button tone Memory A tone will sound when a button is The memory function allows you to save pressed. the last selected program. The volume can be set to 17 different When turning the dishwasher off and on levels. It is set to level 8 by default. again after a program has finished or opening and closing the door, the last ^ Select the desired setting and... -
Page 50: Factory Default
Settings Dealer = Turning the demo mode on ^ Select the desired option, confirm Demo modes are only for with showrooms. ^ Confirm the following messages with The dishwasher has three demo programs for showrooms. ^ Press any button to start the selected The programs "Demo mode"... -
Page 51: Frequently Asked Questions
– Select the desired program. Start – Select If the problem persists, contact Technical Service. The buzzer sounds. The The waterproof system – Turn off the water display shows the has activated. supply. following: – Contact Miele Fault Waterproof F70 Technical Service. - Page 52 – Remove the item, if fault blocked. necessary restart the program. – If the message shows again contact Miele Technical Service. Automatic door opening Possible technical fault. – Open the door by hand and fault restart the program. – If the message shows again contact Miele Technical Service.
-
Page 53: Problems Water Intake/Drain
Frequently asked questions Problems water intake/drain Issue Possible fault Solution The buzzer sounds. The display shows the following: No water intake The water supply is Open the water supply all the Open the water faucet closed. way. Fault water intake FXX Before fixing the fault: –... - Page 54 Frequently asked questions Issue Possible fault Solution The program "Energy The intake water does not – Restart the program. Saver" displays the have a minimum – If the fault is displayed fault: temperature of 115°F again, use a different Water intake temp. too (45°C).
-
Page 55: General Problems With The Dishwasher
Frequently asked questions General problems with the dishwasher Issue Possible fault Solution The display remains The display has gone Touch any control. off. into "Standby" mode to save energy. The display shows the The middle or lower Open the dishwasher door spray arm is blocked and rearrange the items following:... - Page 56 Frequently asked questions Issue Possible fault Solution Detergent is left in the The dispenser was damp Dry the dispenser before dispenser at the end of a when detergent was adding detergent. program. added. The detergent lid cannot Detergent residue is Remove the residue.
-
Page 57: Sounds
Frequently asked questions Sounds Issue Possible fault Solution There is a knocking The spray arm is hitting an Interrupt the program, noise in the wash item in the basket. rearrange items blocking cabinet. the spray arms. There is a rattling Items are not secure in the Interrupt the program and wash cabinet. -
Page 58: Poor Cleaning Results
Frequently asked questions Poor cleaning results Issue Possible fault Solution The dishes are not The dishes were not loaded See "Loading the clean. correctly. dishwasher". The program was not Select a more intensive powerful enough. program, see "Program Guide". Stubborn but normal soiling Use the function "Adjust (e.g. - Page 59 Frequently asked questions Issue Possible fault Solution Dishes are not dry, The rinse aid setting may be Increase the dosage, refill glasses and cutlery too low, or the rinse aid the reservoir or switch the are spotted. reservoir is empty. rinse aid product when refilling, see "Before using for the first time".
- Page 60 Frequently asked questions Issue Possible fault Solution Glasses are Detergent deposits. Use a different detergent. discolored and the film cannot be wiped off. Glasses are dull and Glasses are not dishwasher There is no remedy. Only discolored, film safe. wash dishwasher safe cannot be wiped off.
-
Page 61: Comparison Tests
Comparison Tests 10 place settings, Standard program: Normal Upper basket Lower basket Cutlery tray... - Page 62 Comparison Tests 12 place settings, Standard program: Normal Upper basket Lower basket Cutlery tray...
- Page 63 Comparison Tests 14 place settings, Standard program: Normal Upper basket Lower basket Cutlery tray...
-
Page 64: After Sales Service
Miele products will not be recognized to input these into your machine by Miele. Our goal is to prevent controls via the indicator light marked unauthorized (and untrained) service PC. Miele will provide information when personnel from working on your Miele such possibilities become available. -
Page 65: Transport
Transport To transport the dishwasher, e.g. when moving to a new home, note the following: – Empty the dishwasher. – Secure any loose parts, e.g. hoses, cables, cutlery baskets. – Transport the dishwasher in the upright position. If unavoidable it may be transported on its back. -
Page 67: User Maintenance Instructions
User Maintenance Instructions To prevent accidents and machine damage, read these instructions before installation or use. -
Page 68: Cleaning And Care
– abrasive cleaners, The wash cabinet can be cleaned with a dishwasher cleaner such as "Dis – stainless steel cleaners, Cleaner" available from your Miele – dishwasher soap (powder), dealer or online at http://store.miele.com. – caustic (oven) cleaners, –... -
Page 69: Triple Filter System
Cleaning and Care Triple filter system Cleaning the triple filter The triple filter system in the base of the wash cabinet prevents food from being redeposited on dishes. It also protects the circulation pump from damage caused by foreign objects (e.g. broken glass, bones, etc.). - Page 70 Cleaning and Care ^ Return the filter so it lies flat in the To clean the underside of the filter the flap must be opened. base of the wash cabinet. ^ Push the clips together a and open ^ Lock the filter by turning the handle the flap b.
-
Page 71: Cleaning The Spray Arms
Cleaning and Care Cleaning the spray arms Sometimes particles of food get stuck in the spray arm jets. The spray arms should be inspected and cleaned every 4 - 6 months. ^ Turn off the dishwasher before cleaning. Removing the spray arms ^ Remove the cutlery tray (if present). -
Page 72: Cleaning The Water Inlet Filter
^ Reinsert the filter and seal. Make sure connection is recommended. These filters can be purchased from Miele. they are seated correctly. ^ Screw the intake hose back on the Cleaning the filter... -
Page 73: Cleaning The Drain Pump And Non-Return Valve
Cleaning and Care Cleaning the drain pump and non-return valve If the dishwasher is not completely drained at the end of a program, the drain pump or non-return valve may be blocked. ^ Turn off the dishwasher and pull the plug. -
Page 75: Installation Instructions
Installation Instructions For installation of the dishwasher please refer to the Installation Sheet supplied with these instructions. -
Page 76: Electrical Connection
V 1-800-565-6435 right side of the door. A damaged power cord must only Specifications be replaced with a genuine Miele The dishwasher comes equipped with a cord by a Miele service technician. 4 ft (1.2 m) power cord with a molded... -
Page 77: Plumbing
Waterproof system – The inlet hose is approximately 5 ft. (1.5m) long. A 5 ft. (1.5m) extension All Miele dishwashers have a safety valve hose is available from Miele. located on the incoming water line and a sealed underside with a water sensor. -
Page 78: Drainage
7/8" (22 mm). remove the lower basket. – Drain hose extensions and adapters ^ Pull the lower spray arm firmly can be ordered from Miele. The maximum drain hose length is upwards to remove. 13 ft. (4 m), max. drain height: 39"... -
Page 79: Remotevision
RemoteVision The Miele RemoteVision system is Be sure your wireless system meets the designed to send messages directly to following requirements Miele and/or your PC. ® – Windows XP or newer operating ® For information on set-up and system, Mac OS X 10.3 or higher... - Page 80 Alterations reserved/4308 M.-Nr. 07 329 110 / 02 G 2832 For the most updated manual see the Miele web site.