Push Stick Pattern - Hitachi C12RA Instruction Manual

English
PUSH STICK CONSTRUCTION
● This is a full-size drawing (actual size)
● Use good quality plywood or solid wood
● Use 1/2 in (12.7mm). or 3/4 in (19.1mm).
material
● Push stick MUST be thinner than the width
of material being cut
Cut Here
To Push 1/2
in.(12.7mm)
Wood
Cut Here To
Push 3/4 in.
(19.1mm)
Wood
– 20 –
Drill Hole For
Hanging
Notch To Prevent
Hand From
Slipping