Replacing The Rear Brake Pads - Yamaha YP400T Service Manual

1
a
2
1
FRONT AND REAR BRAKES
6. Install:
• front brake caliper 1
• front brake caliper retaining bolts 2
2
7. Check:
• brake fluid level
Below the minimum level mark a → Add
the recommended brake fluid to the proper
level.
Refer to "CHECKING THE BRAKE FLUID
LEVEL" in chapter 3.
8. Check:
• brake lever operation
Soft or spongy feeling → Bleed the brake
system.
Refer to "BLEEDING THE HYDRAULIC
BRAKE SYSTEM" in chapter 3.
EAS00583

REPLACING THE REAR BRAKE PADS

NOTE:
_
When replacing the brake pads, it is not neces-
sary to disconnect the brake hose or disas-
semble the brake caliper.
1. Remove:
• rear brake caliper retaining bolts 1
• rear brake caliper 2
2. Remove:
• brake pads 1
• brake pad springs 2
4 - 15
CHAS
27 Nm (2.7 m · kg, 19 ft · lb)