Toshiba 65L9400U User Manual page 64

64
Initial Setup and Menu
Performing the initial setup
After scanning is complete, the auto tuning results screen (such as
the one below) will appear.
(Sample Illustration) Auto Tuning Results screen
Press the OK button.
NOTE
If some channels are not found after scanning:
Check the antenna/cable connections, and scan again.
❖
Connect the TV to the antenna or cable box directly and scan again.
❖
1
2
3
4
5
Auto Tuning (Antenna)
Antenna Channels Found: 13
Ch.
101 - 201
201
101 - 201
201
101 - 201
201
101 - 201
201
The encrypted channels are not listed on the auto tuning result screen.
Press the MENU button. Select Installation > Channel
Tuning > ANT/CABLE In and press the OK button.
Press the p / q (arrow) buttons to select Antenna or Cable.
If you selected Antenna previously, selecting Cable
❖
may yield more channels.
If you selected Cable previously, selecting Antenna
❖
may yield more channels.
Press the OK button.
Press the p / q (arrow) buttons to select Auto Tuning, and
then press the OK button.
A confirmation screen appears.
Press the OK button to start Auto Tuning.
Type RF Ch.
0
ATV
11
22
DTV
33
ATV
44
DTV
55
ATV
66
DTV
77
ATV