Connecting A Digital Audio System - Toshiba 65L9400U User Manual

38
Connecting Your TV

Connecting a digital audio system

Connecting a digital audio system
The TV's Digital Audio Out terminal outputs a Dolby
2-channel down-mixed PCM (pulse-code modulation) signal for using
with an external Dolby
audio systems with optical audio input.
You will need an Optical audio cable. (Use an optical audio cable that
has the larger "TosLink™" connector and not the smaller "mini-optical"
connector.)
TV back panel
(Sample Illustration) L9400U Series—Connecting a digital audio
system
TV back panel
(Sample Illustration) L8400U Series—Connecting a digital audio
system
Before controlling the audio, see
format" on page
NOTE
®
Digital and/or DTS
DIGITAL
AUDIO
OUT
DIGITAL
AUDIO
OUT
121.
Some audio systems may not be compatible with Dolby
bitstream signals. Older audio systems that are not compatible with
standard optical out signals may not work properly, creating a high noise
level that may damage speakers or headphones. THIS DAMAGE IS NOT
COVERED BY YOUR WARRANTY. The DIGITAL AUDIO OUT terminal may
not output some digital audio sources because of copy restrictions.
®
The Dolby Digital or DTS
❖
situations:
- When tuned to a digital RF channel
- When an HDMI
- When network devices are used
Optical audio cable
Optical audio cable
"Selecting the optical audio output
®
format is available in the following
®
input is used
®
Digital, DTS
®
decoder, or other external
Digital audio system
LINE IN Optical
L R Audio IN
Digital audio system
LINE IN Optical
L R Audio IN
®
Digital or DTS
®
or
®