NOTE
To reset to the factory defaults:
1
Press the MENU button.
2
Select Picture > Reset.
3
Press the OK button.
A confirmation screen appears.
4
Press the t / u (arrow) buttons to select Yes, and then press OK.
Using the advanced picture settings features
Edge Enhancer
If the Edge Enhancer set to On, the clarity levels can be adjusted
automatically.
1
Press the MENU button.
2
Select Picture > Advanced Picture Settings > Edge Enhancer
and press the OK button.
3
Press the p / q (arrow) buttons to select On.
4
Press the EXIT button.
NOTE
Dynamic Contrast
Dynamic Contrast detects changes in picture quality that affect the
appearance of your contrast settings and then automatically adjusts the
video.
1
Press the MENU button.
2
Select Picture > Advanced Picture Settings > Dynamic Contrast
and press the OK button.
3
Press the p / q (arrow) buttons to select High, Low, or Off.
4
Press the EXIT button.
Using the advanced picture settings features
Any picture settings that you adjust affect the current input only.
❖
You can adjust the picture quality separately for each input.
Depending on a Sharpness value, the Edge Enhancer effect may be
❖
reduced.
This feature may not work properly depending on the content.
❖
Noise may appear on the image depending on the device connected to
❖
the TV (e.g. a device with a specific enhancer function).
Picture and Sound Controls
109