Toyoset RCA-2800 Operation And Maintenance Instructions page 7

ASSEMBLY AND OPERATION
REPLACING THE WICK
WARNING: Before disassembling your heater, allow it to cool completely.
1. To release the automatic extinguisher, push the manual shutoff
button.
2. After the heat chamber has cooled completely, open the grille and
remove the heat chamber.
3. Grasp the wick adjuster knob and pull it straight off the wick
adjuster shutoff.
4. Remove the batteries from the battery holder.
5. Lift out the removable fuel tank and set it aside.
Remove the three (3) screws at the side and rear of the cabinet by
using the screwdriver, and lift the cabinet off, bringing it slightly
forward.
6. Remove the four (4) wing nuts around the wick adjuster assembly.
Lift the assembly off the heater.
6