Toyoset RCA-2800 Operation And Maintenance Instructions page 3

1. Open the fuel tank lid on the top of heater cabinet and lift out the
removable fuel tank. Turn the removable tank upside down and
remove the fuel tank cap.
2. Insert the straight tube of the manual siphon into the kerosene
container. Insert the siphon's flexible hose into the removable
fuel tank opening.
3. Turn the air vent knob on the top of the siphon clockwise to close
the vent. Start the flow of kerosene by squeezing the bulb of the
siphon vigorously six or seven times. Once flow begins, it is no
longer necessary to squeeze the bulb.
4. Watch the fuel gauge on the removable tank to avoid overfilling.
When it shows half, stop flow by turning the air vent knob
counterclockwise.
NOTE: Be careful to avoid overfilling the tank, especially with
very cold kerosene. Overflow might occur due to
expansion when the fuel warms up.
5. Remove the siphon carefully, allowing excess kerosene to drain from the tube back into the
container. replace fuel tank cap and tighten it securely. Be sure to wipe away any spilled
kerosene from tank and other heater parts.
6. After making sure fuel tank cap is tightly fastened, invert tank and replace into heater body.
Manual shutoff button
Removable fuel tank
Top plate
Grille
Body
Heat
chamber
Front panel
Tank lid
Fuel indicator
Drip tray
Wick adjuster knob
2
Stop
here
Fuel Gauge
Igniter button