D-Link DIR-815 User Manual page 88

DIR-815 Wireless N600 Dual Band Router
User Manual
Parameter
Username
Without authorization
Password
Password confirmation
Service name
Authentication
algorithm
MTU
Keep Alive
Dial on demand
PPP IP extension
Static IP Address
PPP debug
PPPoE pass through
PPP
A username (login) to access the Internet.
Select the checkbox if you don't need to enter a username and
password to access the Internet.
A password to access the Internet.
The confirmation of the entered password (to avoid mistypes).
The name of the PPPoE authentication server.
Select a required authentication method from the drop-down list or
leave the AUTO value.
The maximum size of units transmitted by the interface.
Select the checkbox if you want the router to
your ISP even when the connection has been inactive for a specified
period of time. When the checkbox is selected, the LCP interval
and LCP fails fields are available. Specify the required values.
Select the checkbox if you want the router to establish connection to
the Internet on demand. In the Maximum idle time field, specify a
period of inactivity (in seconds) after which the connection should
be terminated.
This option is used by some ISPs. Contact your ISP to clarify if this
checkbox needs to be enabled.
Fill in the field if you want to use a static IP address to access the
Internet.
Select the checkbox if you want to log
debugging.
Select the checkbox if you want to allow PPPoE clients of
computers from your LAN to connect to the Internet through this
PPPoE connection of the router.
Page 88 of 173
Configuring via Web-based Interface
Description
keep you connected to
all data on PPP connection