D-Link DIR-815 User Manual page 108

DIR-815 Wireless N600 Dual Band Router
User Manual
To create a MAC-IP pair, click the Add button. In the IP field, enter an IP address which will be
assigned to the device from the LAN, then in the MAC field, enter the MAC address of this device.
In the Host field, specify a network name of the device for easier identification (optional).
Also you can create a MAC-IP pair for a device connected to the router's LAN at the moment. To do
this, select the relevant value from the Known IP/MAC addresses drop-down list (the IP and MAC
fields will be filled in automatically).
When all needed MAC-IP pairs are specified, click the Save button.
Existing MAC-IP pairs are displayed in the table of the Static DHCP section. To remove a pair,
select the checkbox in the relevant line in the table and click the Remove button. Then click the
Save button.
Figure 86. The section for creating MAC-IP pairs.
Page 108 of 173
Configuring via Web-based Interface