DIR-815 Wireless N600 Dual Band Router
User Manual
LAN
To configure the router's local interface, proceed to the Net / LAN page.
If needed, edit the basic settings of the local interface.
Parameter
IP Address
Netmask
When needed settings are configured, click the Save button.
In the DHCP server section, you can configure the built-in DHCP server of the router.
Figure 84. Basic settings of the local interface.
The IP address of the router in the local subnet. By default, the
following value is specified: 192.168.0.1.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
Figure 85. The section for configuring the DHCP server.
Page 106 of 173
Configuring via Web-based Interface
Description