DIR-815 Wireless N600 Dual Band Router
User Manual
PPTP + Static IP or L2TP + Static IP Connection
Fill in the IP Address and Netmask fields.
In the Gateway IP address field, enter the IP address of the gateway used by this WAN
connection.
In the Primary DNS server field, enter the address of the primary DNS server.
As a rule, the specified settings are enough to configure a non-protected connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page.
Figure 37. Configuring PPTP + Static IP WAN connection.
Page 51 of 173
Configuring via Web-based Interface