Custom Program - LG DLEX3570 Series Owner's Manual

Dryer lg dlex3570 series/ dlex3370 series/ dlex3170 series/ dlgx3571 series/ dlgx3371 series/ dlgx3171 series
Hide thumbs Also See for DLEX3570 Series:
Table of Contents

Advertisement

Available languages

Available languages

.36 HOWTO
USE
Custom
program
If you have a special combination
of settings
that you
use frequently,
you can save these settings as a CUSTOM
PROGRAM.
To Save a Custom Program:
1. Turn on the dryer and turn the cycle selector knob to
select the desired cycle.
2. Use the cycle setting buttons
to adjust the settings for
that cycle.
3. Press the cycle option
button(s)
for the option
you
would
like to add. A confirmation
message will be
shown in the display.
4. Press and hold the CUSTOM PROGRAM button
for 3
seconds.
- @ NOTE
You may save only one custom program
at a time.
Pressing and holding
the CUSTOM PROGRAM button
will overwrite
any previously saved custom program.
To Recall a Custom Program:
1.Turn on the dryer.
2. Press the CUSTOM PROGRAM button.
3. Press the START/PAUSE button
to start the cycle.
Sfeam
funcfions
To Fill t heSteam Feeder
1. Pull out the drawer.
2, Lift out the steam feeder.
3. Fill the steam
feeder
just
to the filter
screen.
Tap Water
ONLY
4. Place the steam feeder in the drawer; then push in the
drawer until it clicks into place.
_ @NOTE
Before using a Steam Cycle, the steam feeder must
be filled with water up to the MAX line. If not, the will
be displayed.
Make sure that the steam feeder is filled
with water or the drawer is fully closed. Turn the dryer
off then restart the Steam Cycle.
Only use Tap Water. Do not fill the steam feeder with
foreign substances, rinse agents, or detergents.
Before moving the dryer, make sure the steam feeder
is empty.
Do not use distilled water; the water level sensor in
the steam generator
will not work.
Be careful to put the Steam Feeder otherwise
water
will be overflow.
• Wipe up any spilled water around the Steam Feeder
and the drawer before starting
the dryer.
Do not fill the steam feeder with hot water (over
86°F/30°C).
_WARNING
. Do not fill the steam feeder with liquids
such as
gasoline,
dry-cleaning
solvents,
or other flammable
or explosive substances.Failure to follow this warning
can cause serious injury or death.
. Do not drink water from the steam feeder. Failure to
follow this warning can cause serious injury or death.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents