Before Using The Tag On - LG DLEX3570 Series Owner's Manual

HOWTO usz 39
Before using the Tag On function
- The Tag On function allows you to conveniently use the
LG Smart DiagnosisTM and Cycle Download features to
communicate with your appliance right from your own
smart phone.To use the Tag On function:
1. Download the LG Smart Laundry&DW App to your
smart phone.
ZTum on the NFC (Near Field Communication) function
in your smart phone.
- The Tag On function can only be used with smart
phones equipped with the NFC function and based on
the Android operating system (OS).
NOTE --_
@ending on the smart phone manufacturer and J
ndroid OS version, the NFC activation process may J
iffer, Refer to the manual of your smart phone for J
J
TheTag On icon
1. Enter the"Settings" menu of
the smart phone and select
"Share & Connect" under
"WIRELESS & NETWORKS."
Tag On position
_ ook for the Tag On icon next to the LED screen
,, on the control panel.This is where you position
your smart phone when using the Tag On
function with the LG Smart Diagnosis
TM,
Cycle
Download, and Laundry Stats features of the LG
Smart Laundry&DW application.
2. I[11Set"N FC" and
"Direct/Android Beam"to
ON, _land select"NFC".
3. Check"Use Read and Write/
P2P receive".
+
When you use the Tag On function, position your smart
phone so that the NFC antenna on the back of your
smart phone matches the position of the Tag On icon
on the appliance. If you do not know the position of
your NFC antenna, move your smart phone very slightly
in a circular motion until the application verifies the
connection.
Because of the characteristics of NFC, if the transmission
distance is too far, or if there is a metal sticker or a thick
case on the phone, transmission will not be good.
Press [ _ ] in the LG Smart Laundry&DW app for a
more detailed guide on how to use the Tag On function.