Vermont Castings SDDVTCSBDSB Installation And Operating Instructions Manual page 14

Sddvt series stardanceĀ® direct vent gas heater
Table of Contents

Advertisement

Stardance® Direct Vent/Natural Vent Gas Heater
Vermont Castings Group Vent Components
The following kits are available to meet the needs of most
installations. All pipe has a 7" outer diameter and includes
a 4" diameter inner section. A (CG) designation indicates
the part is finished in Charcoal Gray paint. Consult your
dealer about other vent parts that may be appropriate to
complete the installation.
Min. Through the Wall Vent Kit
(1) 90-Degree Elbow (CG)
(1) 24" Straight pipe (CG)
(1) 24" - 42" Adjustable Straight Pipe
(1) Side Wall Termination
(1) Firestop
(1) Zero-clearance sleeve
(1) Hardware package
(1) Finishing plate (CG)
(1) Finishing collar (CG)
(4) Charcoal Gray flue pipe rings
Starter Kit for Below Grade Installation
(1) Snorkel Termination (7TDVSNORK)
Vertical Termination Kit, 1/12-6/12 Pitch
(1) Combination Horizontal Offset / Roof Support
(1) Vertical Termination
(1) Storm Collar
(1) 1/12-6/12 Flashing
(1) Finishing Plate (CG)
(1) Finishing Collar (CG)
(1) Polished Brass Flue Pipe Ring
(1) Hardware Package
Vertical Termination Kit, 7/12-12/12 Pitch
(1) 7/12 - 12/12 Flashing
and all of the other Vertical Termination parts.
Vertical Termination, Flat Roof
(1) Flat Flashing
and all of the other Vertical Termination parts.
14
Twist Lock 12" Straight Pipe (CG)
(1) 12" Non-adjustable Pipe
Twist Lock 12"-18" Straight Pipe (CG)
(1) 12" - 18" Adjustable Pipe
Twist Lock 24" Straight Pipe (CG)
(1) 24" Non-adjustable Pipe
Twist Lock 48" Straight Pipe (CG)
(1) 48" Nonadjustable Pipe
7TFSSK
Twist Lock 45-Degree Elbow (CG)
for vertical offsets
(1) 45-degree Elbow
Draft Hood Adapter
NV Stove Kit
(1) 7" Diameter Polished Brass Trim Ring
(1) 48" Nonadjustable Pipe (CG)
(1) 24" Nonadjustable Pipe (CG)
(1) Finishing Plate
(1) Finishing Collar (CG)
(1) 90 Degree Elbow (CG)
7TDVSKS
Stove Kit
Includes all parts in the 7FSSK plus the Draft Hood Adapter FS-
7TDVSKVA
DHAG
Combination Offset/Roof Support
Attic Insulation Shield
7" Charcoal Gray Pipe Rings, (4)
7" Polished Brass Pipe Rings (4)
Wall Thimble
7TDVSKVB
7DVSKVF
NOTE: Direct vent pipe may be used on the Natural Vent
system from the top of the draft hood adapter to the ceil-
ing.
7TFSDVP12
7TFSDVP1218
7TFSDVP24
7TFSDVP48
7TFSDVT45
FSDHAG
7FSSK
7FSDHASK
7DVCS
7DVAIS
7FSDRG
7FSDRP
942G
20306760

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

SddvtcsbssbSddvtcscbsbSddvtcsbmsb

Table of Contents