Hardware And Mechanical Issues - Fujitsu SPARC T5440 User Manual

A
A P P E N D I X
Fixed Issues
This appendix describes the fixed issues concerning the SPARC Enterprise T5440
server. You can avoid the issues by using the latest version of Solaris OS, System
Firmware, or other software. For details on the fix, see the "workaround" in each
table.
"Hardware and Mechanical Issues" on page 57
■
"Solaris OS Issues" on page 58
■
"Integrated Lights Out Manager (ILOM) Issues" on page 62
■
"Firmware and General Software Issues" on page 76
■

Hardware and Mechanical Issues

TABLE A-1
Fixed Hardware and Mechanical Issues
TABLE A-1
CR ID Description
6724921 In rare conditions under an extreme workload
with a frame buffer card installed in an External
I/O Expansion Unit slot, the system may reset
and at least one "Fatal Error" message will be
seen on the SP console. For example:
Chassis | major: Aug
ERROR: [CMP0
lists the hardware and mechanical issues that have been fixed.
7 14:32:04
] Received Fatal Error
Workaround
Do not install XVR-300 frame buffer cards in an
External I/O Expansion Unit. If you see this
error message under any other circumstances,
contact your service engineer.
57