Fujitsu SPARC T5440 User Manual page 53

0:0:0>Master CPU Tests Basic....Done
0:0:0>Init MMU.....
Fault | critical: SP detected fault at time Mon Jan 18 08:45:10 2010. /SYS/PADCRD
prom is unreadable or corrupted
0:0:0>NCU Setup and PIU link train....Done
0:0:0>L2 Tests....Done
0:0:0>Extended CPU Tests....Done
0:0:0>Scrub Memory....Done
0:0:0>SPU CWQ Tests...Done
0:0:0>MAU Tests...Done
0:0:0>Network Interface Unit Tests....Done
0:0:0>Functional CPU Tests....Done
0:0:0>Extended Memory Tests....Done
2010-01-18 08:46:50.299 0:0:0>INFO:
2010-01-18 08:46:50.302 0:0:0>
2010-01-18 08:46:50.307 0:0:0>POST:
2010-01-18 08:46:50.310 0:0:0>Master set ACK for vbsc runpost command and
spin...
Chassis | major: Host is running
SPARC Enterprise T5440, No Keyboard
Copyright 2009 Sun Microsystems, Inc.
OpenBoot 4.30.6, 8064 MB memory available, Serial #85367270.
Ethernet address 0:21:28:16:99:e6, Host ID: 851699e6.
{0} ok
This event occurs in case you power off the system and remove the power cord in a
short period of time, or in case you remove and insert the power cord in a short
period of time. When the above time period is too short, the ILOM internal process
does not complete normally.
When this event occurred, perform the following procedure. After you restored
using this procedure, you do not need to replace the component.
1. Turn off the power to the system.
Power-off operation example:
In case of ALOM CMT compatible shell
■
sc> poweroff -y
In case of ILOM mode
■
-> stop -script /SYS
2. Wait for 180 or more seconds.
3. Remove the power cord.
4. Wait for 180 or more seconds.
POST Passed all devices.
Return to VBSC.
All rights reserved.
Chapter 3 Known Issues 43