How To Insert Batteries - LG ATNH126ELFC Service Manual

Installation
Remote Controller
DISASSEMBLING
Front case
Lever carefully
the box open
using a screw
driver, etc.
• Fix the under plate on the wall
Face of wall
Under plate
Screw (accessory)
ELECTRICAL WIRING
Remote Controller Preparation (Convertible type)
HOW TO MOUNT ONTO A WALL

HOW TO INSERT BATTERIES

1. Remove the battery cover from the remote controller.
• Slide the cover according to the arrow direction.
2. Insert the two batteries.
• Be sure that the (+) and (-) directions are correct.
• Be sure that both batteries are new.
3. Re-attach the cover.
• Slide it back into position.
44 Synchro Air Conditioner
Remote control
box body
(Main board)
CN REMO
• Separate the under plate from Remote control box.
• Fix the cord clamps on the wall by
ø 3 tapping screws (accessory).
• Fix the remote control cord.
Wire and make sure that terminal
numbers are matched on unit side and
remote controller side.
The maximum length of the cord is 100m.
If the length of the cord exceeds 50m,
use a wire size greater than 0.5mm
Cord clamp
(accessory)
2
.
• Do not use rechargeable bat-
teries, such batteries differ
from standard dry cells in
shape, dimensions, and perfor-
mance.
• Romove the batteries from the
remote controller if the air con-
ditioner is not going to be used
for some long time.