REFRIGERATION INSTALLATIONS LIMITED
Telephone: +44 (0)161 366 1110
10. Repair
10.1 Motor Replacement
10.1.1 Remove the Top Motor Assembly from the appliance and
pull the Paddle out of its seating. Remove the two Philips head
cover retaining screws that attach the clear plastic cover to the
motor housing and remove the cover.
10.1.2 Remove the four tamperproof screws and, holding the
assembly firmly to stop it falling apart, turn the assembly over so
that it sits upright (in the same attitude as when it is on the
appliance). There are three mouldings that form the Top Motor
Assembly (apart from the clear cover). The top ventilated
moulding, the centre moulding on which the motor is mounted, and
the bottom moulding into which the Paddle drive cogs locate. If the
unit is allowed to fall apart the drive cogs will fall loose and make
re-assembly more difficult.
D ocument Reference: WI 9
Issue 02
Unit D9 Newton Business Park
Cartwright Street
Hyde
Cheshire SK14 4EH
10.1.1
Cover
retaining
screws
Fax: +44 (0)161 366 1190
10.1.2
Tamperproof screws
Page 13 of 13