Step Eleven: Attach Boom Arms To The Boom Bracket - North Star 2851701 Owner's Manual

Step Eleven: Attach boom arms to the boom bracket

1. Attach the boom arms to the boom bracket with (2) bolts, (2) nyloc nuts, and (4) flat washers.
2. Tighten nuts until the boom arms do not move freely. (They should still be loose enough to
move up and down.)
Flat washer
Boom arm
Flat washer
Boom
bracket
Step Twelve: Connect boom valve to pump
Install the boom valve with (2) hose clamps and (1) 6" hose. Follow hose clamp installation
instructions below.
1. Attach one end of the 6" hose to the boom hose barb on the pump.
2. Attach the other end of the 6" hose to the boom valve.
Assembly (continued)

Nyloc nut
Bolt
Flat washer
Nyloc nut
15
Boom arm
Flat washer
Bolt
Boom
bracket