A Guide to TracVision 4
The PCB cover fits snugly over the
PCB. When removing or replacing
the cover, take care to ensure that
the cover does not dislodge any of
the Molex connectors as this will
cause system errors and improper
operation.
Power Data (J4)
Fuse
5-4
Figure 5-2
Figure 5-3
+27
Azimuth
Motor
(J1)
5.4.1 CPU Board
Elevation
Motor
(J2)
PCB Cover
Azimuth/Elevation
Switch (J5)
External Sensor (J3)
RF PCB (J9)
Antenna Gyro (J11)