Rear Combination Light Assembly - Subaru Impreza 2004 Service Manual

18.Rear Combination Light As-
sembly
A: REMOVAL
1. SEDAN
1) Disconnect the ground cable from battery.
2) Remove the clips, and then detach the trunk rear
trim.
3) Remove the trunk side trim of rear portion.
4) Remove the four nuts, and then detach the rear
combination light while disconnecting connector.
2. WAGON
1) Disconnect the ground cable from battery.
2) Remove the clips, and then detach the rear com-
bination light covers.

Rear Combination Light Assembly

LI-00208
LI-00209
LI-00210
LI-21
3) Remove the two bolts, and then remove the rear
combination light while disconnecting connector.
B: INSTALLATION
Install in the reverse order of removal.
LIGHTING SYSTEM
LI-00211
LI-00231