Using The Embedded Web Pages - Extron electronics ShareLink 200 Setup Manual

ShareLink 200 • Setup Guide (Continued)

Using the Embedded Web Pages

The ShareLink 200 Embedded Web pages contain the following features:
• WebShare: allows users to view a presentation remotely on their mobile devices or computers.
• Moderator mode: allows a designated moderator to play or stop user presentations, and to choose where to display the
presentations on the main screen.
• Admin Mode: allows a designated administrator to configure the ShareLink 200 settings (See the ShareLink 200 User Guide
for instructions on using the Admin pages).
Opening the Embedded Web Pages
To access the embedded Web pages, enter the ShareLink IP address (shown on the standby screen) into the Web browser.
The landing page appears on the Web browser as shown here:
2 2
3 3
6 6
ShareLink 200 Landing Page
Figure 2.
1
Configure — Click to access the Admin pages and configure presentation settings (see the ShareLink 200 User Guide for
instructions on using the Admin pages).
2
Windows — Click to run the Lite version of the ShareLink 200 software for Windows.
3
Install Pro Software for Windows — Click to install the Pro version of the ShareLink 200 software for Windows (see the
ShareLink 200 User Guide for details).
4
Mac — Click to run the Lite version of the ShareLink 200 software for Mac.
5
Install Pro Software for Mac — Click to install the Pro version of the ShareLink 200 software for Mac (see the
ShareLink 200 User Guide for details).
NOTE:
To see a list of differences between the Lite and Pro software, click the information (
links.
6
Watch Presentation — Click to access the WebShare feature (see Using WebShare to Watch a Presentation, below).
7
Moderate Presentation — See
Using WebShare to Watch a Presentation
WebShare allows audience members to view a presentation on their computers or mobile devices through a Web browser. The
presenter may broadcast the presentation so that the image shown on the display can be viewed remotely.
NOTES:
•
WebShare must be enabled on the client software or mobile app in order for the presentation to be viewed remotely by
other users.
•
Each user connected through WebShare adds to the wireless bandwidth of the ShareLink 200. It is recommended that
the device be connected to an Ethernet network or bridged to a router for best performance.
6
Using Moderator Mode on the next page.
1 1
4 4
5 5
7 7
) icon next to the Pro software