Reference Notes; Front Assembly - Denon DVD-2500BTCI Service Manual

Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to "Reference Notes."
About tightening screws
When tightening screws, tighten them with the
following torque.
Torque
0.45 ± 0.05 N·m

Reference Notes

1. CAUTION 1: Locking Tabs (L-1) and (L-2) are
fragile. Be careful not to break them.
1) Release three Locking Tabs (L-2).
2) Disconnect connectors CN2001, CN4002, then
remove the Front Assembly.
2. CAUTION 2: When installing the BE Main CBA
Unit with a screw, hold and press the BE Main
CBA Unit to align the HDMI connector with the
connector's hole for HDMI on the Rear Panel.
(S-1)
(S-1)
(S-1)
(S-2)
(S-2)
(S-1)
(S-1)
[1] Top Cover
Fig. D1
DVD-2500BTCI
[2] Top Panel
(S-3)

[4] Front Assembly

(S-4)
(S-5)
(L-1)
(L-2)
(L-1)
[3] Tray Panel
12
(S-3)
(S-3)
(S-3)
Fig. D2
(S-5a)
(S-4)
(S-5)
CN2001
CN4002
Fig. D3