Specifications - Crown I-T5000 HD Operation Manual

I-Tech HD Series Power Amplifiers

6 Specifications

Minimum Guaranteed Power
20 Hz - 20 kHz with 0.35% THD
Stereo, 2 ohms (per ch.)
Stereo, 4 ohms (per ch.)
Stereo, 8 ohms (per ch.)
Bridge mono, 4 ohms
Bridge mono, 8 ohms
Performance
Input Sensitivity (volts RMS) for rated output
Voltage Gain for full rated power at 8 ohms
Frequency Response (at 1 watt, 20Hz - 20 kHz)
Signal to Noise Ratio below rated full-bandwidth power, A-weighted
Total Harmonic Distortion (THD) at full rated power at 1 kHz
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1,
from full rated output to –35 dB
Maximum Input Level
Latency
A/D, D/A Converters
Digital Input
Network
DSP
Attenuators
Operation Manual
I-T5000HD
1800W
2000W
1250W
3600W
4000W
I-T5000HD
Adjustable in 0.1V steps from
1.28V to 8V
37.1 dB to 22.2 dB
± 0.25 dB
> 108 dB
< 0.1%
< 0.35%
+15 dBu or +21 dBu, depending on setting of
maximum input level depending on setting of maximum input level
1.16 mS at 48 kHz, 529 µS at 96 kHz
24-bit 96 kHz Cirrus Logic
AES/EBU, 24-bit, 32-96 kHz.
Onboard sample rate converter.
Onboard HiQnet and TCP/IQ, compatible with Onboard HiQnet and TCP/IQ, compatible with
standard 100Mb Ethernet hardware
24-bit conversion with 32-bit, floating-
point DSP processing
Speed-sensitive rotary encoders, 0.5 dB
steps, range 0 to –100 dB.
I-T9000HD
2500W
3000W
1500W
5000W
6000W
I-T9000HD
Adjustable in 0.1V steps from
1.28V to 8V
37.9 dB to 23.0 dB
± 0.25 dB
> 108 dB
< 0.1%
< 0.35%
+15 dBu or +21 dBu,
depending on setting of maximum input level
1.16 mS at 48 kHz, 529 µS at 96 kHz
24-bit 96 kHz Cirrus Logic
AES/EBU, 24-bit, 32-96 kHz.
Onboard sample rate converter.
Onboard HiQnet and TCP/IQ, compatible with
standard 100Mb Ethernet hardware
24-bit conversion with 32-bit, floating- 24-bit conversion with 32-bit, floating-
point DSP processing
Speed-sensitive rotary encoders, 0.5 dB Speed-sensitive rotary encoders, 0.5 dB
steps, range 0 to –100 dB
I-T12000HD
3500W
4000W
2100W
7000W
8000W
I-T12000HD
Adjustable in 0.1V steps from
1.28V to 8V
40.1 dB to 24.5 dB
± 0.25 dB
> 108 dB
< 0.1%
< 0.35%
+15 dBu or +21 dBu,
1.16 mS at 48 kHz, 529 µS at 96 kHz
24-bit 96 kHz Cirrus Logic
AES/EBU, 24-bit, 32-96 kHz.
Onboard sample rate converter.
standard 100Mb Ethernet hardware
point DSP processing
steps, range 0 to –100 dB
page 41