Source Configuration; Cobranet Advanced Settings - Crown I-T5000 HD Operation Manual

I-Tech HD Series Power Amplifiers
4 Advanced Operation

4.8.5 Source Configuration

In this screen you can configure the levels and settings of the
analog, AES and CobraNet inputs. The input signal of each channel
can be independently muted.
The I-Tech HD amplifier can be set to work as a fixed gain amplifier:
any input signal is given a fixed amount of gain, either 26dB or
32dB. In addition, you can set the input sensitivity to determine how
much gain is provided. See Section 4.8.20 for more details.

4.8.6 CobraNet Advanced Settings

In the CobraNet Advanced Settings screen you can set the
parameters shown here. Indicators that are green can't be
modified.
The latency on this screen is the CorbaNet transport latency or
buffering. This latency must be set to the same latency as the
source CobraNet device.
The Foldback control panel lets you select the items to
transmit via CobraNet. Selections available are the Analog
Inputs, Amplifier Outputs or AES input signal. The audio can
be routed out through only one bundle.
Operation Manual
page 29