Listening To Audio From A Connected Component; Recording On A Connected Component - Sony MHC-GN70V Operating Instructions Manual

Listening to audio from a
connected component
To Do This
Listen to a 1 Connect the audio cords.
connected MD deck See "Hooking up optional
components" on page 34.
2 Press MD (VIDEO).
Start playing the connected
MD deck.
Listen to a 1 Connect the audio cords.
connected VCR See "Hooking up optional
components" on page 34.
2 Hold down MD (VIDEO)
on the system and press @/1
on the system while the
power is on. Release @/1
first, then release MD
(VIDEO). This switches the
function from MD to
VIDEO. Start playing the
connected VCR.
Listen to the sound 1 Press GAME.
of a connected 2 Select the preset effect.
video game player
See "Selecting the preset
effect" on page 24.
Notes
• If you press MD (VIDEO) while the power is off,
the power turns on automatically and MD (VIDEO)
is selected as the function.
• If the sound is distorted or too loud when VIDEO
function is selected, or you want to switch back to
MD function, repeat step 2 of "Listen to a
connected VCR".
• If you press GAME while the power is off, the
power turns on automatically and GAME is selected
as a function. The equalizer switches to GAME EQ
and the previously selected effect is restored.
Recording on a connected
component
To Do This
Make an analog
1 Connect an optional audio
recording from CD,
cord from AUDIO OUT
TAPE or TUNER
jack to the audio input of
onto a connected the MD deck. See "Hooking
MD deck up optional components" on
page 34.
2 Start recording.
Refer to operating
instructions provided with
the connected MD deck.
Record the audio and
1 Connect an optional audio
video signals from a
cords from AUDIO OUT
VIDEO CD onto a
jack and the supplied video
video tape
cable from the VIDEO OUT
jack to the audio and video
input of your VCR. See
"Hooking up optional
components" on page 34.
2 Start recording.
Refer to operating
instructions provided with
the connected VCR.
MHC-GN70 4-246-556-11 (3)
GB
35