Tape; Loading A Tape; Playing A Tape - Sony MHC-GN70V Operating Instructions Manual

Tape

Loading a tape

1
Press TAPE A/B repeatedly to select
deck A or B.
2
Press Z on the selected deck.
3
Insert a tape in deck A or B.
Insert with the
side you want to
play or record
facing forward.

Playing a tape

You can use TYPE 1 (normal) tape.
1
Load a tape.
2
Press DIRECTION repeatedly to select
"g" to play one side, "j" to play
both sides or "RELAY"* (Relay Play) to
play both decks in succession.
3
Press hH.
The tape starts playing.
Press hH again to play the reverse side.
ALL DISCS
* Relay Play follows this cyclic sequence:
Deck A (front side) t Deck A (reverse side) t
Deck B (front side) t Deck B (reverse side)
GB
20
Tape presence indicator
SURR
EFFECT
V - GROOVE LINK LINK
A B
To Do this
Stop playback Press x.
Pause playback Press X. Press again to resume
playback.
Press M while playing the
Fast forward
front side, or press m while
playing the reverse side.
Rewind Press m while playing the
front side, or press M while
playing the reverse side.
Remove the tape Press A A or A B.
Tips
• During j or Relay Play, the deck stops
automatically after repeating the sequence five
times.
• If you press TAPE A/B while the power is off, the
power turns on automatically and TAPE is selected
as a function.
• When a tape (tapes) is (are) inserted, corresponding
presence indicators light up.
Searching for the beginning of a
track (AMS*)
During playback, press > or . repeatedly
for the number of songs you want to skip
forward (or backward).
The search direction, + (forward) or
– (backward), and the number of songs being
skipped (1~9) appear in the display.
Example: searching forward 2 songs
* AMS (Automatic Music Sensor)
Note
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the system is placed near a television.
MHC-GN70 4-246-556-11 (3)