Chapter 1. Removing Of Major Parts; Removing Of Major Parts - Sharp LC-32LE705E/S Service Manual

CHAPTER 1.
LC-32LE705E

REMOVING OF MAJOR PARTS

[1] REMOVING OF MAJOR PARTS
1. Removing of Bezel Ass'y, Panel Chassis Ass'y, Optical Sheet, Lens Sheet, Diffusion Plate, Back Light Chas-
sis and LCD Control Unit (32 inch models).
NOTE: A clean booth is required for repair of the component units and/ or parts (LCD Panel HIRAKI, LED PWB etc.) inside the LCD panel module
unit.
1. Remove the 10 lock screws
2. Detach the 32" LCD Panel HIRAKI Unit and Panel Chassis Ass'y
3. Detach the Optical sheet
4. Remove the 16 Push Rivets
5. Remove the 32 Push Rivets
6. Remove the 8 Terminators
7. Detach the 4 LED5 PWB1 Units
8. Disconnect the connecting cords from the 8 connectors
9. Detach the Back Light Chassis
10.Detach the 2 Connecting Cord
11.Remove the 6 lock screws
32" LCD
Panel HIRAKI Unit
Bezel Ass'y
,10 lock screws and detach the Bezel Ass'y
and Lens Sheet and Micro Lens Sheet
and 4 Support Pins and detach the Reflection Sheet
.
and 8 connections and detach the 4 LED8 PWB1 Units
and 4 LED5 PWB2 Units
.
and 2 Ferrite Core .
and detach the LCD Control Unit
Micro Lens Sheet
5
Optical Sheet
Lens Sheet
Panel Chassis
Ass'y
4
3
1
2
18
17
Reflection Sheet
Support Pin
10
Push Rivet
9
LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
Service Manual
.
.
Diffusion Plate
.
of the LED5 PWB1/2 Unit.
7
Diffusion Plate 8
6
LCD Control
Unit 24
Back Light
Chassis
20
19
14
13
12
11
1 – 1
.
.
and 4 LED8 PWB2 Units
23
Ferrite Core
22
Connecting Cord
21
16
15
.