Sharp LC-32LE705E/S Service Manual page 10

LC-32/40/46LE705E/S, LU705E/S, LX705E, LC-52LE705E/S
2. Handling notes (32 inch models).
1. Set and connect LED-PWBs.
RUNTKA655WJ01 / WJ02
Top Side
Bottom Side (C-PWB side)
WIRE HARNESS
Set and connect LED-PWBs
RUNTKA655WJ01/02
LED-PWB set direction
(arrow mark to harness side)
Boss of
BL-CHASSIS
LED-PWB
Boss fitting
(showing in blue circles)
2. Peel off the lamination film of LENS SHEET on the both sides.
Peel off the lamination film of LENS SHEET on the both sides.
INSIDE of
RUNTKA655WJ01
BL-CHASSIS
RUNTKA655WJ02
RUNTKA655WJ01
RUNTKA655WJ02
RUNTKA655WJ01
RUNTKA655WJ02
RUNTKA655WJ01
RUNTKA655WJ02
*Same for other 7 lines.
Connect LED-PWBs
Insert the connector horizontally mutually.
Do not add inadequate power.
FRONT
Top Side
Bottom Side (C-PWB side)
LED-PWB set direction
(arrow mark to harness side)
Peel off the lamination film.
1 – 2
RUNTKA658WJ01 / WJ02
RUNTKA658WJ01/02
BACK
RUNTKA658WJ01
RUNTKA658WJ02
RUNTKA658WJ01
RUNTKA658WJ02
RUNTKA658WJ01
RUNTKA658WJ02
RUNTKA658WJ01
RUNTKA658WJ02
TERMINATOR
is Attached