Table of Contents
Advertisement
Chapter
7.
Power on the devices connected to the Switch. Each
active port's corresponding LED will light up on the
Switch.
Uplinking the Switch
To uplink the Switch, connect one end of a Cat 5 (or better)
Ethernet network cable into one of the gigabit ports, and
then connect the other end of the cable into the peripheral
device's uplink port. MDI/MDIX will automatically detect
the speed and cable type.
The hardware installation is complete.
24-Port 10/100 + 2-Port 10/100/1000 Gigabit Advanced Smart Switch with 2 Combo SFPs
Installation
Hide quick links:
Advertisement
Table of Contents
