10/100Base-Tx Switched Ports - KTI Networks KS2028 Installation Manual

3.3 10/100BASE-TX Switched Ports

This section applies to the 10/100BASE-TX Port #9 and expansion slot
Port #10 pre-configured with a 10/100BASE-TX port module. Use the
crossover switch to set the type of RJ-45 connector as follows:
The following table lists the devices to which the ports can connect:
Device connected
Computer 10BASE-T port
10BASE-T hub port (I type)
10BASE-T hub port (X type)
10BASE-T switched port (I type)
10BASE-T switched port (X type)
100BASE-TX hub port (I type)
100BASE-TX hub port (X type)
100BASE-TX switched port (I type)
100BASE-TX switched port (X type)
Cable Type and Maximum Length
Connection
10BASE-T (10Mbps)
100BASE-TX (100Mbps)
Crossover SW
X setting
X setting
I setting
X setting
I setting
X setting
I setting
X setting
I setting
UTP Cable Category
Cat. 3, 5
Cat. 5
14
Cable used
Cat. 3, 5 straight UTP
Cat. 3, 5 straight UTP
Cat. 3, 5 straight UTP
Cat. 3, 5 straight UTP
Cat. 3, 5 straight UTP
Cat. 5 straight UTP
Cat. 5 straight UTP
Cat. 5 straight UTP
Cat. 5 straight UTP
Maximum length
100 meters
100 meters