Table of Contents
Advertisement
1000BASE-T
PORTS
SFP
TRANSCEIVER
SLOTS
PORT AND
SYSTEM STATUS
LEDS
Table 2: Port Status LEDs
DESCRIPTION OF
HARDWARE
The switch contains 10/100/1000BASE-T RJ-45 ports. All RJ-45
ports support automatic MDI/MDI-X operation, auto-negotiation
and IEEE 802.3x auto-negotiation of flow control, so the
optimum
data
automatically.
SW24GF4TG supports the Small Form Factor Pluggable (SFP)
transceiver slots port 1 to port 24, the port 21 to port 24 are
shared with RJ-45 (the port 21-24 are combo interface
RJ45/SFP). In the default configuration, if an SFP transceiver
(purchased separately) is installed in a slot and has a valid link
on the port, the associated RJ-45 port is disabled.
The port 25 to 28 Supports 10GbE SFP+ transceiver slots, the
port 25 to 28 are high performance interface for backbone
uplink.
The SW24GF4TG switch includes a display panel for system and
port
indications
troubleshooting. The LEDs, which are located on left hand side of
the front panel for easy viewing. Details are shown below and
described in the following tables.
P1-P24 SFP
rate
and
transmission
that
simplify
P21-P24 TP
P25-P26 SFP+
4
can
be
selected
installation
and
network
MGMT TP
Advertisement
Table of Contents
