Placement; Ac Power Guidelines - Krell Industries KAV-280p Instructions For Use Manual

Placement

AC Power
Guidelines
4
Before you install the KAV–280p into your system, review the fol-
lowing guidelines to choose the location for the KAV–280p. This
will facilitate a clean, trouble-free installation. The KAV–280p does
not require any type of special rack or cabinet for installation. For
the dimensions of the KAV–280p, see Specifications, on the back
cover.
Place the KAV–280p on a firm, level surface, away from excessive
heat, humidity, or moisture. The KAV–280p is not hum-sensitive.
Other components may be placed on or around the KAV–280p.
Make sure the top and bottom ventilation grids are unobstructed.
You may experiment with feet or cones as long as they are not
permanently affixed to the chassis. Any unauthorized modifications
to the electronics or chassis will void the warranty.
The KAV–280p has superb regulation and does not require a dedi-
cated AC circuit. Avoid connections through extension cords or
multiple AC adapters. High quality 15 amp grounded AC strips are
acceptable. High quality AC line conditioners or filters may be
used if they are grounded. Contact your authorized Krell dealer,
distributor, or Krell before using any devices designed to alter or
stabilize the AC power for the KAV–280p.
The KAV–280p should be operated only with the power cord
supplied.
Krell KAV–280p