Opening The Phantom Ii Shipping Carton; Unpacking And Placement - Krell Industries PHANTOM II Owner's Reference Manual

TWO
SECTION

Unpacking and Placement

This section describes the procedures for safely unpacking and placing your
Phantom II Preamplifier. The Phantom II preamplifier and accessories are shipped
in 1 carton.

Opening the Phantom II Shipping Carton

The Phantom II shipping carton measures 22.3 in. (56.6 cm) wide by 23.5 in. (59.7
cm) high by 16.2 in. (41.1 cm) deep.
Preamplifier Chassis. This measures 17.3 in. (43.8 cm) wide by 3.8 in. (9.7 cm)
high by 18.3 in. (46.4 cm) deep, and weighs 22 lbs. (10 kg).
To Remove the Preamplifier from the Shipping Carton
1.
Open the shipping carton and remove the top layer of foam. The carton con-
tains these items:
1 Preamplifier chassis
1 IEC Connector (AC Power) cord
1 Remote control
2 AAA-size 1.5 Volt batteries for the remote
1 T-10 Torx wrench for the remote control
1 Owner's Reference
2.
Carefully remove the preamplifier and accessories from the box.
3.
Place the preamplifier in a safe location, and remove the protective plastic
wrapping.
11
continued