5-36
MC9000-G with Windows
Spectrum24 Frequency Hopping (FH) Settings (1 and 2 MB
Radios)
FH settings are not supported on MC9000-G RFID mobile computers.
The Spectrum24 FH Settings tabs are used to configure the mobile computer's wireless network
settings for frequency hopping. Tap Start - Settings -System tab - Spectrum24 FH Settings icon to
display the Symbol Spectrum24 FH settings window.
Tab
Mobile Unit
MicroAP
Encryption
IP Config
®
Mobile 2003 Software for Pocket PCs PRG
Figure 5-28. Mobile Unit Tab
Table 5-12. Spectrum24 FH Tab Descriptions
The Mobile Unit tab configures the mobile computer ESSID, power management, RTS threshold,
International Roaming capability and AP options, see
The MicroAP tab sets the mobile computer to operate as an AP and establishes a single-cell
wireless network, see
MicroAP Tab on page
The Encryption tab sets the WLAN adapter to make the wireless link less vulnerable to
information theft, see
Encryption Tab on page
The IP Config tab configures the mobile computer profile network address parameters (IP
address, subnet, gateway, DNS and WINS) (see
Description
Mobile Unit Tab on page
5-39.
5-41.
IP Config Tab on page
5-38.
5-42).