Panasonic WV-NP1000 Operating Instructions Manual page 32

Step 6
Select "ON" or "OFF" for "Light detection control".
When "ON" is selected, detection errors caused by turn-
ing lighting on/off can be diminished.
Notes:
• Complete prevention of detection error is not guar-
anteed even if using this function.
• When "ON" is selected, performance of the motion
detection may be lower.
Step 7
Click the [SET] button after completing the settings.
Important:
The setting will not be applied unless the [SET] but-
ton is clicked.
Delete the set VMD area
Step 1
Click the [DEL] button respective to the area to be delet-
ed.
→ The outline of the area will disappear and the select-
ed area will be deleted.
Step 2
Click the [SET] button after completing settings.
32